Dreame Blade Discs – A1, A1 Pro, A2 & A3 AWD

Replacement mowing discs for Dreame A1, A1 Pro, A2 and the larger A3 AWD series. The first A generation shares a mount—the A3 has its own mowing unit.

IN STOCK
Mowing disc Dreame A3 AWD 2000 & A3 AWD 3500 PRO – cutting disc
from 81,90 € Choose variant
IN STOCK
Mowing disc Dreame A1, A1 Pro & A2 – cutting disc for robotic mowers
from 40,90 € Choose variant

Dreame: Household robotics in the garden

Dreame comes from the area of vacuum robots and has consistently transferred this experience to the garden: LiDAR navigation, map creation via app, and real-time obstacle detection. Entry was made in 2023 with the A1; since then, the program has grown to include several models.

For the spare parts question, two groups are crucial—and their model names are unfortunately very close to each other, which regularly leads to incorrect orders.

The model families

Model	Area / Special feature
Dreame A1	up to 2,000 m², base model of the first generation
Dreame A1 Pro	same area, better sensors and edge guidance
Dreame A2	successor with revised navigation
Dreame A3 AWD 2000	from 2,000 m², its own larger mowing deck
Dreame A3 AWD 3500 PRO	up to 3,500 m², identical pickup as A3 2000

Typical problems with Dreame robots

Worn blade mounts in continuous operation

If you run an A3 AWD over several thousand square meters, at some point you’ll get stripes in the lawn that look like the cutting height has been adjusted. The cause is play in the blade holders—at that point, simply replacing the Klinge(n) no longer helps; the entire Mähteller must be replaced.

Mix-up of A2 and A3

Only one digit separates the two generations; the cutting units are different. When reordering, be sure to check the type label on the underside.

Grass felt under the mowing disc

On all Dreame models, clippings collect on the underside and prevent the Klinge(n) from swinging freely. Regular scraping off maintains cutting quality and noticeably extends service life.

Compatible mowing discs

Mowing disc Dreame A1, A1 Pro & A2 – cutting disc for robotic lawnmowers

To the product →

Mowing disc Dreame A3 AWD 2000 & A3 AWD 3500 PRO – cutting disc

To the product →

For the first generation, the mowing disc for A1, A1 Pro and A2 fits perfectly—one disc for three models. The larger series is covered by the disc for A3 AWD 2000 and 3500 PRO.

An advantage of the uniform mounting

Most manufacturers change the mowing deck with every model update—so if you switch to the successor after three years, you may have to discard your spare parts stock. For the A1, A1 Pro and A2, Dreame has done without this. If two different Dreame models are used in the garden, one stock is enough for both. And when switching within this series, existing discs remain usable.