Mähteller Worx Landroid M500, M700, WR141E, WR167E & Vision M600 – Messerscheibe

Mowing disc for Worx Landroid M500, M700, WR141E, WR167E & Vision M600 – cutting disc - Image 2

Mowing disc for Worx Landroid M500, M700, WR141E, WR167E & Vision M600 – cutting disc - Image 3

Mowing disc for Worx Landroid M500, M700, WR141E, WR167E & Vision M600 – cutting disc

39,90 €

The GRASBOT cutting disc for Worx Landroid and Vision ensures a clean, even cutting pattern with six sharp blades.

Compatible with selected Worx Landroid and Vision models
6 blades for precise lawn cutting
Rust-resistant stainless steel blades and robust composite plastic
Ships within 24 hours

Choose your delivery scope

Cutting disc
incl. 6 blades

39,90 €

Cutting disc
incl. 7 blades

42,90 €

save 7,18 €

Cutting disc + 60 blades set

72,62 €

save 7,45 €

Cutting disc 7 blades + 60 blades set

75,35 €

In stock – ships within 24hFits the listed models exactly30-day right of return under EU lawDirect from the manufacturer – fair prices

SKU: GB-WORX-LANDROID-6 Worx

Description

Replacement mowing disc for Landroid M and Vision M600

Around the Landroid, a cutting disc is often searched for after experience—an indication that many users are not entirely satisfied with the cutting image and are looking for an alternative. This disc fits Landroid M500, M700, WR141E, WR167E and Vision M600, optionally with six or seven pre-assembled stainless steel blades.

Mowing disc for Worx Landroid M in the lawn — Six or seven cuts instead of the factory solution

What a disc changes in everyday use

The Landroid works on the principle of many small cuts: with each trip, it trims only a few millimeters and runs more often. To make it look even, each blade of grass needs to be hit as frequently as possible along the same path.

This is exactly where a disc with multiple cutting disc blades comes in. It increases the number of cuts per revolution without changing the robot’s mowing behavior—navigation, schedule, and cutting height remain as set.

It is mounted on the same mount as the factory version. No adapter, no drilling, no modification to the device.

Compatible Landroid models

Landroid M500

Landroid M700

Landroid WR141E

Landroid WR167E

Landroid Vision M600

Not compatible with: the Vision-Cloud series (WR303E to WR330E). These devices have their own mowing deck—so we offer separate cutting discs for Worx Vision Cloud.

Frequently asked questions about the Landroid

Worx releases the Landroid series with several naming schemes in parallel—letters, numbers, and WR codes side by side. This regularly leads to confusion:

M500, M700 or WR141E – what’s the difference?

The WR numbers are Worx internal item designations for the same devices, under which they are sold in retail. A WR141E is the Landroid M500, a WR167E the M700 – the same series, different labeling.

For choosing replacement parts, that means: all four names refer to this disc. Whether the device is labeled M500, M700, or a WR number makes no difference.

As usual, the number indicates the intended lawn area. You’ll notice it when the parts wear out – not on the mowing unit itself.

Vision M600 yes, Vision Cloud no – why?

Worx uses the name Vision for several devices that are not technically identical. The Vision M600 belongs to the M series and shares its mowing unit – this disc fits.

By contrast, the Vision Cloud models with WR numbers from WR303E are a separate series for larger areas with a different mounting. For them, we offer a separate disc.

If in doubt, the complete designation on the type plate or in the Worx app under device information will help.

Does the cutting height adjustment remain usable?

Yes, without restriction. The Landroid’s height adjustment works via the chassis, not via the mowing deck—so it is unaffected by the disc change.

A practical note: If you set the cutting height very low, you increase the risk of blade contact with uneven ground and lawn edge stones. This reduces cutting performance, regardless of which disc is installed.

For uneven areas, it’s worth driving one level higher and having it mow more frequently instead.

Changing the disc on the Landroid

Switch off the robot and remove it from the charging station.
Put on gloves and lay the device on its side.
Loosen the factory version and clear the mowing area of grass residues.
Fit the new disc and tighten it evenly.
Tap each blade: it must be able to rotate freely around its screw.

Afterward, it’s worth taking a look at the rear wheels on the Landroid. They are narrow and in humid summers they often get clogged with grass matting, which additionally makes the robot work harder when turning.

Underside of a Worx Landroid with mowing disc — The WR number and model name are located on the device

Technical data

Blade count	6 or 7 blades (selectable)
Blade material	Stainless steel
Blade storage	Free to rotate on the screw – folds away when encountering obstacles
Mowing disc material	Impact-resistant plastic composite
Compatible with	Landroid M500, M700, WR141E, WR167E, Vision M600
Not compatible with	Worx Vision Cloud (WR303E – WR330E)
Package contents	1 mowing disc with factory-mounted cutting disc blades
Installation	On the original mounting point, no modification required
Shipping	Ships directly from the manufacturer, dispatch within 24 h

6 or 7 blades

For the M series, we offer two configurations. Both fit the same mounting— the difference lies in the cutting pattern and in how much work the mowing deck has to do afterwards.

6 blades – the most sought-after version

Anyone looking for a cutting disc for Worx almost always ends up with this configuration. Six cutting edges provide significantly more cuts per revolution than a more economical factory solution, without overloading the drive of the compact Landroid.

This version is the only one with a closed center—the 7-blade disc does not have it. With the Landroid, this is a noticeable advantage because the device sits low and, when turning, pushes a lot of cut material under the chassis. Without a cover, it rests against the blade mount until a blade gets jammed.

For operation without regular visual checks, this is the most straightforward choice.

Choose 6-blade variant

Base price

Mowing disc with 6 blades for Worx Landroid M500 — 6 blades – with closed center

Mowing disc with 7 blades for Worx Landroid — 7 blades – finer cut pattern

7 blades – for short-cut lawns

One more cutting edge creates an additional cutting event per revolution. On well-maintained areas that the Landroid mows every two days, the result therefore looks more uniform.

Especially useful where the lawn grows densely and individual blades left standing would stand out.

Without a closed center: No problem in dry conditions – if you mow frequently when it’s damp, you’re better off with the 6-blade version.

Choose 7-blade variant

Additional charge, see selection above

When the cutting blades are due

✓Grass tips look torn instead of cleanly cut

✓The lawn looks dull two days after mowing

✓In denser areas, blades remain standing

✓A blade no longer spins freely

Buy blades individually

The disc lasts through many sets of blades – the entire set is always replaced at once. With the 60-blade replacement set including screws, you’re stocked for a long time without needing to place another order in between.

To the blade set

Frequently asked questions

Does the cutting disc fit the Landroid M500, M700 and WR167E?

Yes, it also fits the WR141E and Vision M600. These models share the same disc mount.

Can I use the M-series mowing disc on the Vision Cloud WR312E?

No. The Vision-Cloud series from WR303E has a different cutting system. For that, you need the corresponding Vision-Cloud disc.

Why does the mulching result become coarser over time with the Landroid?

The Landroid works with small blades at high speed. As the sharpness decreases, this principle loses effectiveness faster than in robots with larger blades—the cut material then becomes visibly coarser.

How often do I need to change the cutting disc on the Landroid?

Base it on the cut pattern, not the calendar. With the Landroid, the issue is diminishing sharpness—not material breakage. Anyone waiting for visible damage mows for too long with a poor result.

Is the disc also available with 9 blades?

For the Landroid M series, we offer 6 and 7 blades. A 9-blade version is not sensibly implementable with this cutting system.

Does the Landroid collect more clippings than other robots?

Yes, because the mulching material is very fine and settles more easily into crevices. Check the underside regularly—this maintains cutting quality and extends service life.

Are the blades already installed?

Yes, the disc comes ready to install. You don’t need to screw individual blades on.

0.0 out of 5

0 Reviews

5 stars 0%

4 stars 0%

3 stars 0%

2 stars 0%

1 stars 0%

Write a review

Your review *

Name *

Email *

Your review *

Add photo (optional) Choose photo

GRASBOT Assembly Instructions

General assembly instructions for cutting discs, replacement blades, and blades for compatible robotic lawnmowers.

Note

These instructions apply generally to compatible cutting discs, replacement blades, and blades from GRASBOT.
They do not refer to a specific model or specific version. Always additionally follow
the operating instructions of your robotic lawnmower.

Important safety notice

Sharp blades. Risk of injury. The blades and blades can cause severe cuts.
Always wear suitable protective gloves during assembly, disassembly, cleaning, and maintenance.
Never work on the cutting disc while it is still moving.

1. General safety instructions

The operator is responsible for accidents, injuries, and damage that occur to other people or their property.
Keep children, animals, and bystanders away from the robotic lawnmower during work and during operation.
Never touch the cutting disc or the blades while they are still moving.
Always switch the robotic lawnmower completely off before working on the cutting disc or on the blades.
If possible, remove the battery or disconnect the device from the power supply.
Always wear suitable protective gloves.
Do not use damaged, bent, heavily worn, or corroded blades, screws, or cutting discs.
Regularly check the condition of the blades, the mounting screws, and the cutting disc.

2. Tools and materials required

Suitable screwdriver or bit, matching the screws used.
Protective gloves.
New or inspected fastening screws.
GRASBOT cutting disc, replacement blades, or blade(s).
Optional: soft surface for safely placing the mowing robot.

Important

Use only suitable screws and appropriate mounting material.
If provided for by the manufacturer or included in the delivery, use screws with thread-locking compound
or suitable screw locking.

3. Preparation

Fully stop the mowing robot.
Switch off the device according to the operating instructions.
Remove the battery if possible.
Wait until the cutting disc has come to a complete stop.
Carefully turn the mowing robot over and place it on a stable, soft surface.
Check the work area for cleanliness and adequate lighting.

4. Dismantling the existing cutting disc

Loosen the mounting screws of the existing cutting disc.
Remove the screws completely and set them safely aside.
Carefully remove the existing cutting disc from the blade mount.
Clean the blade mount of grass clippings, dirt, and deposits.
Check the blade mount for damage or unusual wear.

Warning

Do not use the new cutting disc if the blade mount, mounting points,
threads, or screws are damaged. In this case, the lawn mower may only be used again after
proper inspection.

5. Installing the GRASBOT cutting disc

Fit the GRASBOT cutting disc onto the blade mount.
Make sure the cutting disc sits flat and is correctly centered.
Insert the appropriate fastening screws.
Tighten the screws evenly and firmly.
Do not overtighten the screws to avoid damage to threads or components.
After installation, check that the cutting disc is securely fastened.
Carefully rotate the cutting disc by hand and check that it runs freely.

6. Installation or replacement of the replacement blades

Loosen the screws of the old blades.
Carefully remove the old blades.
Clean the contact surfaces on the cutting disc.
Install the new GRASBOT replacement blades on the designated mounting points.
Make sure the blades remain free to move, if this is intended by the design.
Fasten each blade with a suitable screw.
Tighten the screws securely without over-tightening them.
Check each blade for a secure fit and free movement.

7. Check after installation

Are all screws fully inserted and securely fastened?
Is the cutting disc straight and firmly seated?
Can the blades move freely, if intended?
Have no tools or foreign objects been left in the area of the cutting disc?
Does the cutting disc run freely and without grinding?

8. Operation and Maintenance

Check the blades, screws, and cutting disc regularly for wear.
Replace damaged or heavily worn parts immediately.
Clean the cutting disc regularly of grass clippings and dirt.
Do not use the lawn mower robot if unusual noises, vibrations, or running problems occur.
Use only compatible replacement parts and suitable mounting materials.

Note on Blade Replacement

Always replace blades in good time. Dull or damaged blades can worsen the cutting pattern,
place a greater load on the lawn mower robot, and impair safety.

9. Disclaimer

GRASBOT cutting discs, replacement blades, and blades are accessories and replacement parts for compatible lawn mower robots.
They are not original accessories from the respective device manufacturer unless this is explicitly
stated in the product description.

Assembly and use are carried out at your own responsibility. No liability is assumed for damage caused by improper assembly,
incorrect use, damaged components, or failure to follow the operating instructions of the lawn mower robot.

Warning in case of injury

If you are injured or have an accident, seek medical help immediately.

GPSR Information on Product Safety

Product safety information in accordance with Regulation (EU) 2023/988 on general product safety.

Manufacturer & Responsible Person (EU)

CUT GUARD

Polana Brzozowa 7C

59-900 Zgorzelec

Poland

E-mail:
info@grasbot.com

Website:
www.grasbot.com

Product Identification

Brand: GRASBOT

Product type: cutting discs, replacement blades and blades for compatible lawnmowers

Intended use: Accessories and spare parts for suitable robotic lawnmowers

Product type: Cutting and mounting components for use in robotic lawnmowers

Item number / model / variant: see the respective product description, packaging, or invoice

Compatibility: see the product description and the robotic lawnmower’s operating instructions

Important warning notice

Sharp blades. Risk of injury. The blades and Klingen can cause severe cutting injuries.
Assembly, disassembly, cleaning, and maintenance may only be carried out when the robotic lawnmower is completely switched off.
Always wear suitable protective gloves and wait until the cutting disc has come to a complete stop.

Proper use

GRASBOT cutting discs, replacement blades, and Klingen are intended exclusively as accessories and spare parts for compatible robotic lawnmowers.

The products may only be used for the intended purpose and only in conjunction with suitable, compatible devices.
Any other use, structural modification, or improper installation can lead to injuries, malfunctions, or property damage.

Not suitable for

Children.
People who have not read or understood the operating instructions for the lawn mower robot.
Incompatible lawn mower robots.
Devices with damaged blade mounting, damaged threads, or defective mounting points.
Use outside the intended application area.
Use as a tool, hand knife, or for other cutting work outside the lawn mower robot.

Safety and warning instructions

Use only for the intended purpose.
Use only with compatible mowing robots, suitable cutting discs, and appropriate mounting hardware.
Before any assembly, disassembly, cleaning, or maintenance, switch off the mowing robot completely.
If possible, remove the battery or disconnect the device from the power supply.
Always wait until the cutting disc has come to a complete stop.
Always wear suitable protective gloves.
Keep hands and feet away from rotating blades.
Never touch blades or the cutting disc during operation.
Do not use any damaged, bent, heavily worn, rusted, or corroded blades, screws, or cutting discs.
Regularly check blades, screws, and the cutting disc for secure fit, wear, and damage.
Use only suitable screws and appropriate mounting hardware.
If provided, use screws with thread-locking compound or suitable screw locking.
Keep children, pets, and bystanders out of the work area.
The mowing robot must not be operated when people, especially children, or animals are in the work area.
In the event of unusual noises, vibrations, grinding noises, or running problems, stop operation immediately and check the assembly.
In case of injury or accidents, seek medical help immediately.

Assembly instructions

Assembly may only be carried out when the device is switched off. Always follow the operating instructions of the respective mowing robot.

The cutting disc, replacement blades and blades must be seated correctly and securely fastened. After assembly, check
whether the cutting disc runs freely and whether no tools or foreign objects have been left in the area of the blades.

Checks before operation

Are all screws fully inserted and tightened securely?
Is the cutting disc correctly centered and securely fastened?
Are the blades mounted correctly?
Can blades mounted with movable bearings move freely, provided this is intended by the design?
Are there no visible signs of damage?
Does the cutting disc run freely and without grinding?

Maintenance and inspection

Regularly check the cutting disc, blades, screws, and cutting disc for wear and damage.
Replace damaged or heavily worn parts immediately.
Clean the cutting disc regularly to remove grass clippings, dirt, and deposits.
Do not use aggressive cleaning agents that could damage the material or coating.
Use only compatible replacement parts and suitable mounting materials.

Storage and Disposal

Store replacement blades, blades, screws, and cutting discs dry, clean, and securely.
Store them out of the reach of children and unauthorized persons.

Safely pack used, damaged, or dull blades and blades to avoid cut injuries.
Dispose of metal parts, packaging, and accessories according to locally applicable regulations.

Note on Original Accessories

GRASBOT products are compatible accessories and spare parts. They are not original accessories of the respective device manufacturer unless this is expressly stated in the product description. Brand names, model designations, and manufacturer information are provided exclusively for compatibility purposes.

Contact for safety concerns, complaints, or accidents

If you have questions about product safety, complaints, accidents, or indications of possible safety issues, please contact us immediately:

CUT GUARD
Polana Brzozowa 7C
59-900 Zgorzelec
Poland
E-mail: info@grasbot.com
Website: www.grasbot.com