Description
MOVA offers several product lines side by side, whose names are very similar—the base models, the LiDAX series, and the VIAX series. This disc is for the MOVA 600 and MOVA 1000 base models. It comes with pre-assembled stainless steel blades and replaces the original disc without any modifications.
The entry into the MOVA series
MOVA 600 and MOVA 1000 are the models that many people buy as their first robotic lawnmower—often from a hardware store rather than a specialist retailer. Accordingly, the operating manual is rarely consulted when purchasing replacement parts.
In fact, the assignment is simple: if the device has only a number without any additional label, it belongs to this disc. If a name suffix such as LiDAX or VIAX is included, a different version is required.
Both base models share the same mounting. Whether 600 or 1000—the number refers to the intended lawn area, not the cutting unit.
Compatible MOVA models
Which MOVA series do I have?
The names of the three product lines are often confused—search queries even include mixed forms such as “Vidax” or “Vivax”. The following overview categorizes them:
Swap in just a few steps
- Switch off the robot and remove it from the charging station.
- Put on gloves and turn the device over.
- Remove grass clippings from the mowing area so the new disc sits cleanly.
- Loosen the old disc, fit the new one, and tighten the screws evenly.
- Finally, tap each blade: It must be able to rotate freely around its screw.
For the first change, a suitable screwdriver is enough—no special tools are required. If you’re unsure, take a quick photo of the starting position before disassembling.
Technical data
| Blade count | 6, 7 or 9 blades (selectable) |
| Blade material | Stainless steel |
| Blade mounting | Freely rotating on the screw – folds away when encountering obstacles |
| Mowing disc material | Impact-resistant plastic composite |
| Compatible with | MOVA 600, MOVA 1000 |
| Not compatible | MOVA LiDAX Ultra, MOVA VIAX, Dreame models |
| Package contents | 1 mowing disc with factory-mounted blades |
| Installation | Direct replacement of the original cutting disc |
| Shipping | Ships directly from the manufacturer, dispatch within 24 h |
6, 7 or 9 blades
All three versions fit the same mounting. Which one is the right one depends on how often the robot runs—not on the size of the garden.
6 blades – factory configuration with center protection
The direct replacement for the original disc. Nothing changes in driving behavior, nothing in battery life—the simplest solution when the old disc is worn out.
As the only version, it provides protection over the center of the disc, which is not available with 7 and 9 blades. For beginner devices, this is a real comfort boost: if you want to simply let the robot run without having to turn it over regularly, this is the version where buildup at the blade attachment is least likely.
For anyone replacing a disc for the first time, this is also the most straightforward choice.
7 blades – for well-groomed lawns
An additional cutting edge delivers more cuts per revolution. If you keep the grass short and let the robot run every two to three days, you’ll get a more even result.
The additional wear is kept within reasonable limits—this is why this is the version most people choose when buying a second mowing disc.
Without middle protection: No disadvantage on dry grass. If you start the MOVA in the morning while there’s dew, you’ll be better off with the 6-blade version.
9 blades – when mowing is done daily
The densest configuration is worth it for robots that start practically every day and only trim a few millimeters. The result then looks very uniform.
If, on the other hand, mowing is only done twice a week and longer grass has to be cut, 6 or 7 stronger blades last longer.
Also here without middle protection – with short lawn and daily operation in practice, this is unproblematic.
Time for new blades?
Buy blades individually
Blades are a wear part, not the disc—next time, all you need is a fresh set of cutting. The 60-blade replacement set including screws lasts for several seasons and makes the swap a five-minute job.